Knife Edge Gate Valve is one of the specific design among other Industrial Valves

Knife Edge Gate Valve is one of the specific design among other Industrial Valves,

Knife Edge Gate Valve is one of the specific design among other Industrial Valves. This design ensures minimum contact between the parts of the valve, Reduces the Wear & Tear. The high performance Knife Gate Valves feature. Non Sliding Motion, Avoid Sliding Contact between Body & Gate allow flushing of media form the valve interior. Batten edge of the Gate (Knife-Edge) allows the tight shut off even when solid particles settles at the bottom of the Body. A wide variety of hardened trim options are available on Gate, Seat and Wear Ring.

Knife Gate Valve are Generally Unidirectional Valves, Excellent Hopper Isolation Valves with their ability to cut through flowing media and closed by dislodging any material in the seating area.

Knife-Edge Gate Valves withstand high Temperature & Abrasive Slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.

TYPE :

Uni-directional / Bi-directional Knife Edge Gate Valve

MOC :

Cast Iron / Cast Steel / SS 304 / 316 / 304L / 316L.

Body: Cast Corrosion resistant steel or cast iron to provide receptivity against corrosion For all wetted parts

Gate: The Stainless steel knife gate plate is precision-buffed on both sides, to enhance Packing life and ensure positive shut off even heavy or high-viscous fluid.

Stem: Stainless steel or as desire, having double start thread rising / non-rising spindle, For fast closing and opening.

Seat: Renewable Metal-to-Metal, replaceable type, soft seat and other Suitable to application. In addition to standard stainless steel seat ring, rubber ring and Teflon seat rings are Available as options. Gland Packing: Multi layer gland packing in a variety of materials to suit condition provides total sealing.

Port :

Round Port, “V” Notch

END CONNECTION :

Flanged End / ull Lugged, Wafer Flangeless, Two Lug, Wafer Flangeless, Flange Type, Wafer

SIZES :

50mm T0 800mm (higher size on application)

RATING :

10 bar up to 600mm for valves with body in C.S., S.S. and specially alloy, 10 bar Up to 300mm & 5 bar on higher sizes up to 600mm with body in Cast Iron / Ductile Iron.

Drilling :              

Option Include ANSI, DIN, BS, JIS and AS standard; others on request

OPERATION AVAILABLE :              

Knife edge Gate Valves Operation - Manual, Cylinder Operated, Electrical Actuator, Pneumatic Actuator with Manual Override.

WIDELY USED FOR :        

Knife edge Gate Valves for Slurry Lines, Sludge and Viscous Media Handling, Pulp and Paper Stock Lines, Dry Solid and Powder Handling, High Temperature Gas Lines and Many More.

Actuator: Hand Wheel, Chain wheel, Bevel Gear hand wheel or chain wheel, Pneumatic Double Acting cylinder and electric actuator.

Accessories: Flow-age Knife Edge Gate Valves also can be supplied with a wide range and variety of manual, pneumatic and electronic accessories as per suitable to service requirement.