Dasi mom and Sis

Pakistani ka Problem by Ahsaan Ijaz

     

ALENA PAPUCHA HOT 4 U

Name: Hot Melt Rotary Labeler HotLAN

Name: Hot Melt Rotary Labeler HotLAN 

Name: Hot Melt Rotary Labeler HotLAN

Description:

 LANGGUTH’s hotLAN 330 rotary hot melt labeler runs a non contact glue system suited to light PET, shaped labels, square & tapered containers.

 The glue system is change parts free & achieves 30% adhesive savings over traditional glue roller systems.

Details:

LANGGUTH’s hotLAN 330 rotary hot melt labeelr operates with a non contact glue system friendly to light weight PET & square & tapered containers. The glue system is change parts free and does not require cold glue lap.

The glue system achieves a 30% adhesive savings over traditional glue roller systems. For F-style gallons, tapered jars, and other square bottles the non-contact glue system ensures positive label pick up. Typical uses include steel cans, bottled water, vegetable oil, square bottles, juices, F-style dairy and F-style solvents, and general food products.

Impulse turbines are situated to Parts of pelton wheel turbine,

In this type of turbine the operation is rather more like that of waterwheel. In the waterwheel water is directed into buckets which fill, impart rotational velocity by gravity and then empty to rise and collect more. The impulse turbine has ring of fixed nozzles that blast onto bucket type vanes of a rotating wheel. The pressure drop is achieved in the nozzle which is flared and not by the rotating stator. the de Laval spings at typically 30,000 rpm and is ineffiecient at using the steam energy.

Impulse turbines are situated to Parts of pelton wheel turbine

There are four major parts of the turbine

·        Nozzle and spear valve

·        Runner and buckets

·        Casing

·        Breaking jet

Nozzle and spear valve

The water strikes to the bucket of the turbine came from the nozzle. Spear valve is placed inside of nozzle. This valve is used for the throttling of waterflow automatically or manually with hand wheel.

During operation, if we want to control the flow of water, the only thing we need to do is to simply rotate hand wheel.

Runner and buckets

The runner of the turbine is the circular disc and on the periphery of runner, there are multiple buckets which are spaced equally. Every bucket is divided into two symmetrical parts and the wall between these two symmetrical parts is called splitter.

The design of bucket has prime importance. When water strikes at the bucket, splitter divides the water jet into two parts and deflect it with 160° or 170°.

For lab operation, buckets are made of plastic material but to generate power at higher level, cast iron, stainless steel or cast steel bronze is used according to the available head.

Casing

Whole assembly of pelton wheel turbine is enclosed in the casing. The main purpose of using casing is to give water the way to reach tail race after striking buckets.

Breaking jet

During operation, when we want to stop the turbine, we use breaking jet. By using this breaking jet, we can stop the runner of the turbine with the strike of water on the back of buckets.

Knife Edge Gate Valve is one of the specific design among other Industrial Valves

Knife Edge Gate Valve is one of the specific design among other Industrial Valves,

Knife Edge Gate Valve is one of the specific design among other Industrial Valves. This design ensures minimum contact between the parts of the valve, Reduces the Wear & Tear. The high performance Knife Gate Valves feature. Non Sliding Motion, Avoid Sliding Contact between Body & Gate allow flushing of media form the valve interior. Batten edge of the Gate (Knife-Edge) allows the tight shut off even when solid particles settles at the bottom of the Body. A wide variety of hardened trim options are available on Gate, Seat and Wear Ring.

Knife Gate Valve are Generally Unidirectional Valves, Excellent Hopper Isolation Valves with their ability to cut through flowing media and closed by dislodging any material in the seating area.

Knife-Edge Gate Valves withstand high Temperature & Abrasive Slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.

TYPE :

Uni-directional / Bi-directional Knife Edge Gate Valve

MOC :

Cast Iron / Cast Steel / SS 304 / 316 / 304L / 316L.

Body: Cast Corrosion resistant steel or cast iron to provide receptivity against corrosion For all wetted parts

Gate: The Stainless steel knife gate plate is precision-buffed on both sides, to enhance Packing life and ensure positive shut off even heavy or high-viscous fluid.

Stem: Stainless steel or as desire, having double start thread rising / non-rising spindle, For fast closing and opening.

Seat: Renewable Metal-to-Metal, replaceable type, soft seat and other Suitable to application. In addition to standard stainless steel seat ring, rubber ring and Teflon seat rings are Available as options. Gland Packing: Multi layer gland packing in a variety of materials to suit condition provides total sealing.

Port :

Round Port, “V” Notch

END CONNECTION :

Flanged End / ull Lugged, Wafer Flangeless, Two Lug, Wafer Flangeless, Flange Type, Wafer

SIZES :

50mm T0 800mm (higher size on application)

RATING :

10 bar up to 600mm for valves with body in C.S., S.S. and specially alloy, 10 bar Up to 300mm & 5 bar on higher sizes up to 600mm with body in Cast Iron / Ductile Iron.

Drilling :              

Option Include ANSI, DIN, BS, JIS and AS standard; others on request

OPERATION AVAILABLE :              

Knife edge Gate Valves Operation - Manual, Cylinder Operated, Electrical Actuator, Pneumatic Actuator with Manual Override.

WIDELY USED FOR :        

Knife edge Gate Valves for Slurry Lines, Sludge and Viscous Media Handling, Pulp and Paper Stock Lines, Dry Solid and Powder Handling, High Temperature Gas Lines and Many More.

Actuator: Hand Wheel, Chain wheel, Bevel Gear hand wheel or chain wheel, Pneumatic Double Acting cylinder and electric actuator.

Accessories: Flow-age Knife Edge Gate Valves also can be supplied with a wide range and variety of manual, pneumatic and electronic accessories as per suitable to service requirement. 

Indoor Vacuum Circuit Breaker 12/24/36kV

Indoor Vacuum Circuit Breaker 12/24/36kV

Indoor Vacuum Circuit Breaker KIOSK (stand alone) type 12/24/36kV panel is directly installed at site on a plinth. CTs/PTs and relay control panel is in-built in the metal enclosure. The power supply can be taken through roof bushings or a combination of roof bushing and cable box as the case may be.
Ratings

·        Rated Voltage : 11/24/36kV

·        Rated Current  : 630 - 1600A

·        Rated Breaking Capacity (kA) : 16-25kA

Auto cap-arranging

Auto cap-arranging

Additional Info.

Trademark:Ghamachine

Packing:Exported Wooden Case

Origin:Pakistan

Production Capacity:10psc/Month

Product Description

1. This auto vacuum sealing machine, with steam spraying for glass bottles, is widely used for high-speed vacuuming and capping or sealing three or four screw caps and circular tinplate caps of various specifications, like glass jar vacuum capping, sauce bottle vacuum capping, widely used in foodstuff, sauce & drinks vacuuming sealing.
2. Linear bottle in and out, easy to change for bottles of different specifications.
3. Equipped with auto cap-feeding system, easier to operate.
4. Made of satinless steel 304, delicate & durable.

Features:
1. Auto cap-arranging-feeding
2. Auto heating caps
3. Sensoring bottles, the feeding caps; Vice-versa
4. Feeding bottles by bottle-grouping screw
5. AC frequency-conversion (option)
6. Steam spraying vacuum sealing caps
7. Auto stop and alarm when no bottle or bottle stuck

Technical parameters: (customized based on caps & bottles)

Applicable  bottle	glass jars/  bottles	Bottle cap size	Φ 27-Φ 82mm
Production  capacity	80-120pieces/min	broken rate	0.1%
Rated voltage	380V 50HZ	Gross weight	800kg
External  dimension(LWH)	3500× 1150× 2000mm	Total power	2.2kw

Features Specifications:

Installation Layout
User should fit with following:
1.Inner diameter 21mm heat resistant rubber hose for evacuating steam.
2.Inner diameter 42mm rubber hose for flowing away water,length from machine to ditch.
3.Install 1/2"cold water pipe,for water cooling.
4.Install 3/4"steam pipe.
5.Steam evacuating tube,inner diameter 135mm,to outdoor. 

SPECIFICATIONS
Range of Can Size	2"-4" D,H:3"-6"
Capacity	up to 250 caps/min
Required Horse Power	2 HP,1 HP,1/4 HP
Overall Height	82"
Floor Space	137"x32"
Net Weight(Approx)	1300 kgs
Gross Weight(Approx)	1950 kgs
Crate Dimensions(Approx)	147"x38"x88"
Cubic Measurement(Approx)	277 CUFT

RECONCILIAION STATEMENT OF RECEIPTS FOR MONTH

RECONCILIAION STATEMENT OF RECEIPTS FOR MONTH

                                     RECONCILIAION STATEMENT OF RECEIPTS FOR MONTH OF JULY 2013 to APRIL 2014

          NAME OF DEPARTMENT S.P.C.A OKARA

                                     MAJOR HEAD.1231003  Admin of Justional Magistrate Fine

                                     MINOR HEAD.

Detailed Heads	Sanctioned Budget	Proportionate Budget	Department Figures.		A.G, Figures		Variations	Reasons of Variations
1.	2.	3.	4.	5.	6.	7.	8.	9.
	Rs.	Rs.	Rs.	Rs.	Rs.	Rs.	Rs.	Rs.
	-	-
	Total

No.                               Date                                      2014

Copy is forwarded to District Accounts officer Okara for information & request to be verified the income figures please.                                                                                                                                                  

ADMINISTRATOR S.P.C.A

   OKARA